Telephone: +44 1582 496040

TDCi Defender Auto Kit


5.0 average, based on 3 reviews

This product is currently out of stock

Product Information

Regrettably due to poor parts availability and a back log of orders our kits are not now available until 2022.  Please contact us by email from December 2021 and we can take orders from that time.  We are sorry we are not able to supply sooner.

For some time we have successfully marketed the TD5 Defender Auto kit and the natural follow on was the 2007 model TDCi. This was not a simple task and involved considerable development work. We can now announce we are able to convert the 2007 onwards TDCi Defenders from the 6 speed manual to 4 speed auto.

Since it was announced the Defender engine was being changed from the TD5 to the 2.4 TDCi we have been asked if an auto kit will be available, we started working on it straight away and bought a Transit 2.4 engine with manual gearbox to allow us to develop a prototype. In the past when we have made up a conversion kit it has been possible to utilise parts from related vehicles in the existing model range, eg some Defender parts, some Disco parts Etc. The 2007 Defender was a much more complex job involving much more design and manufacture than previous kits. Firstly there was no autobox that was a straight fitment to the new 2.4 engine (unlike the TD5) so we needed to make a bellhousing and flexplate assembly from scratch, also the transfer case has been rotated a further 10 deg from the previous position so new mounts were required. There were many small things like this, where with the TD5 kit you would just use a Disco part on the 2.4 it was a case of working out what you need then prototype, test, draw, sample, manufacture Etc.

As always with our conversions we try to keep as near to Factory spec/look as possible this involved keeping the engine and transfer case in "Factory position" so any conversion to automatic box must fit as a direct replacement for the manual box to avoid any propshaft or transfer case changes. The transfer case still functions as normal i.e, with the diff lock and high and low ratios.

We decided to use the well proven ZF 4HP22EH autobox which was used in the P38 Range Rovers and the Series 2 Discovery's as we have considerable experience with these units and they are readily available. To fit the auto box to the 2.4 engine we manufactured our own bell housing, paying attention to length and orientation of the auto box allowing a "drop in" fit. It was also necessary to design and make a crank boss and flexplate assembly.

In order to give optimal performance of the auto-box we have developed a "stand alone" control unit called the Compushift . The controller takes signals from the throttle position sensor on the throttle pedal, the speed sensor in the autobox and the gear position switch on the side of the autobox, this information is fed to the ECU and the correct gear selected according to the preset "maps".

This "electronic" control is a major step forward over the previous "hydraulic" auto-box conversion we had used in the earlier TD5. With this control unit we have a fully adjustable controller allowing us to "customise" or "map" the gear shift to suit each application. It is possible to map the individual shift points and shift pressure v.s throttle position also the torque converter lock up speed and a whole host of other variables.

A lot of consideration was given to the interior to ensure the conversion had a "factory" feel, we have previously made a 50th anniversary auto console but because of the changes to the 2007 dash a new consol was required.   

Please click here to read the article published in the February 2009 issue of Land Rover Monthly and here to read the article in Land Rover Owner in Spring 2008.

The kit will also fit the new 2.2 Defender TDCi.


The Defender Auto Plaque is not included the kit but is a nice addition.  If you would like this please select from the dropdown menu.


Please note that the lead time on a kit is around 3 weeks.


The price shown is for the kit only however we are able to offer a fitting service for £5,720 plus vat and this price assumes we keep the manual gearbox.     We would require the vehicle is with us for 7-10 working days.   Please contact us directly to arrange a fitting appointment.

Product Code: PUMA CONV KIT

Installation Information » (Click to Expand Collapse)


Please see here for Installation instructions.

Technical Information / FAQ's » (Click to Expand Collapse)

Related Products

Customer Reviews

Average Rating: 5

Four years on

We got our 2.4 Puma converted in 2016 as the manual was causing my wife hip problems. I think we are 40,000 miles on, huge trips across France and the UK, daily commuting, and offroad too at our smallholding - this conversion has been excellent and reliable. Thank you Ashcroft Engineering 1

richard snow :: Aug 04 2020, 08:11 AM

Defender Delight

I have always enjoyed driving my Defender but found the manual six tedious, now since having had my Defender converted to Auto it is an absolute delight to drive. Weather it be on short daily runs, longer motorway trips, challenging off road using in high and low box and towing, it’s a breeze. The professional approach towards producing this amazing auto conversion is also extended to the overall finish, a number of people looking at plate on the rear of my Defender and inside the car have said they didn’t know JLR did an auto Defender such is the quality of the work. Thanks to all involved in putting this smile on my face. Bill Roberts

Bill Roberts :: Mar 16 2020, 18:30 PM

Love it

I love my auto conversion. It makes my Defender so much more user friendly for every day use. I love the factory look inside the car - as if I came like it from LR. The car is great on a long run, cruises on the speed limiter without any problems. Have done several 1000+ mile trips into Europe without stopping and it copes perfectly.

John loughlin :: Jul 05 2018, 15:43 PM

Write a review


Copyright © Ashcroft Transmissions Ltd 2016

Mobile Site

loadContent('admin.order_received'); print_r($content); ?>