Assembly - Main Casing

New LT230 Casing

We are able to supply the latest spec of TDCi LT230 main casings, compatible with all types of LT230T from suffix B-H.

Dowel, Part no. FRC5594

O Ring, Part no. FRC8292

Filler Level Plug, Part no. TYB100070

Plug, Part no. SH214142

Copper Washer, Part no. 232042

Plug, Part no. UKC24L

Rear Housing, Part no. FTC4185

Please note, this is the later type for the direct cable entry handbrake.

Gasket, Part no. FRC5409

Please note on vehicles up until VIN: LA939975 use the gasket

On vehicles from VIN: MA939976 use Silicone Sealant RTC3254

M10 x 30 Bolt (QTY 5 required here)

Please note, we can also supply a complete bolts kit, see here

M10 x 45 Bolt (QTY 1 required here)

Please note, we can also supply a complete bolts kit, see here

Gasket, Part no. FRC5413

Housing, Part no. FTC4866

Fat later type

Outer Flange 16mm

From serial number suffix G onwards

Housing, Part no. FRC6943, good used

Thin earlier type

Outer Flange 11mm

To suit all LT230 up until suffix G

PTO Cover Plate, Part no. FTC3178

M10 x 40 Bolt (QTY 6 required here)

Please note, we can also supply a complete bolts kit, see here

Sump Cover, Part no. FRC5415

Gasket, Part no. FRC5416

M8 x 25 Bolt

Please note, we can also supply a complete bolts kit, see here

Magnetic Drain Plug, Part no. 599552

M12 x 1.5

Magnetic Drain Plug, Part no. FTC5208

3/4 BSP

Copper Washer - FRC4808

Dowel, Part no. FRC2482

Dowel, Part no. 571134

This is the Genuine landrover oil feed plate that was fitted to the non cross drilled input gear to increase oil flow to the spline and stop the mainshaft spline from wearing.

If you have the suffix A or B LT230 you are not able to fit the cross drilled gear so it's a good idea to fit this instead.

Please note these are used take offs but in perfect condition.

Stud, Part no. IYR100010