High Ratio Transfer Case Kit
(View Product)
-
Technical
The kit comprises:- 1 x Input gear 1 x Intermediate gear 1 x High range output gear 1 x Bare re-worked case 1 x Gasket kit
-
Installation
To fit the kit, the old transfer case must be removed then change over the studs, dowels and subassemblies into the new case and build it up using the new gears and refit to vehicle. This kit will fit the IIA and III (big intermediate pin).
If the kit is to be fitted to the Series I or II you will need a new centre pin (large diameter), bearings and low range output gear. The part numbers for these additional parts are : 1 x 594195 pin, 1 x 532323 O ring, 1 x 521328 washe,r 1 x 532979 low gear (36teeth suffic C), 2 x 599869 bearing.