Not Available
Sorry, no suitable part is available.
| 1 |
|
LT230 Input Gear
We can supply the earlier FRC5428 (26T), FTC5089 (26T), FTC5087 (28T) and FTC4850 (38T) input gears. To identify which type you need you will need to look at the your transfer case serial number. The last letter of this will denote whether your vehicle is able to accept the later cross-drilled type. A transfer box with the suffix A or B will only accept the earlier 26th tooth, non cross-drilled type (FRC5428). A transfer box with the suffix C onwards will accept the later cross-drilled type. See below to find the serial number : Please note this table below is assuming you have the standard gears fitted, if you are changing ratio, please see the notes on the gear sets page to see if a different one is required. Defender Guide : Suffix A or B uses a FRC5428 (26T), not available cross drilled Suffix C to F uses a FTC5089 (26T), cross drilled Suffix G, 300 TDi or TD5 uses a FTC4962 (26T) Suffix G, TDCi uses a FTC4850 (38T) (supercedes to IEH500010 / IEH500140) Disco Guide : Suffix C to serial number 28D308626E uses a FTC5089 (26T), cross drilled Serial number 28D309143E to 28D551442F uses a FTC5087 (28T) Suffix G uses a FTC4850 (38T)
If you are not sure where to find your serial number please see this video on the left hand tab
Product Options Do you need a new pair of bearings for the new input gear ? If you find you have the earlier FRC5428 (26T) we are able to supply the oil feed plate which will enable better oil lubrication. | Select options |
| LT230 Input Gear | Select options £70.00 | ||
| LT230 Input Gear | Select options £55.00 | ||
| LT230 Input Gear | Select options £85.00 | ||
| LT230 Input Gear | Select options £75.00 | ||
| LT230 Input Gear | Select options £75.00 | ||
| 2 |
|
ICV100000G, LT230 Transfer box input seal
An oil seal to suit the LT230 transfer box. There is one input per transfer box. Landrover Part Number ICV100000G Corteco brand (genuine parts) | Add to cart £5.00 |
| 3 |
|
FRC5564, Input Gear Bearing 18790/18720
This taper roller bearings fits the input gear on all LT230s. These are genuine Timken brand bearings. Cup number: 18720 Cone number: 18790 | Add to cart £16.00 |
| 4 |
|
LT230 SHIM KIT
Our LT230 shim kit includes two ranges of shims for both the input and centre diff. It would be very costly to include all shims in the LT230 range so we have selected 7 shims for each range which should enable you to obtain the required thickness. The 7 shims in each range are in the following sizes:- 0.05mm, 0.1mm, 0.2 mm, 0.3mm, 0.5mm, 1.00mm, 1.5mm, Always use as few shims as possible to reach the desired thickness. | Add to cart £32.00 |